Search models, users, collections, and posts
Two-faced Sturdy Infinity Cube
IP Report
Print Profile(3)
0.2mm layer, 3 walls, 20% infill
Designer
4.9 h
1 plate
H2D Optimized - no waste with dual-nozzles
Designer
2.5 h
1 plate
A1 Mini, 0.2mm layer, 2 walls, 20% infill
5.2 h
1 plate
Open in Bambu Studio
Boost
278
691
189
43
1.4 k
1.1 k
Released
Description
Show off your AMS multicolor printer with this two-colored infinity cube! As you fold it, it goes from one color to the other. This is a two-color version of the “Sturdy Infinity Cube”.
The cube has strong hinges that won't break easily. This cube is designed with a lot of slack, so that it moves freely
Post-Printing
The hinges should bent quite easily after printing, with the hinges on the front and back side being more tight due to the orientation. Just work the cube a few times and everything should be quite loose.
Slicer Settings
This model is optimized for 0.2 layer height, including the first(!) layer. I use no brim and no supports.
Slicer Settings:
- Layer height: 0.2
- Make sure the first layer is 0.2 (e.g. First layer height = 100%)
- Infill: 20%
- Supports: None
- Brim: None
License
This user content is licensed under a
Creative Commons Public Domain
Comment & Rating (189)