Shenron - Dragon Ball Z

Project: Shenron First Version.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.72mm

    #000000 PLA #BambuLab Basic Black  Transmission Distance: 0.6
    #434b2f PLA BambuLab Matte Dark Green  Transmission Distance: 0.2
    #507526 PLA BambuLab Basic Mistletoe Green  Transmission Distance: 0.1
    #f99963 PLA BambuLab Matte Mandarin Orange  Transmission Distance: 3
    #ffffff PLA #BambuLab Matte Ivory White  Transmission Distance: 3.5
    #ff0000 PLA BambuLab Basic Red  Transmission Distance: 4
    #0078bf PLA BambuLab Matte Marine Blue  Transmission Distance: 0.5
    #becf00 PLA #BambuLab Basic Bright Green  Transmission Distance: 4
This print uses 8 unique filaments

Swap Instructions:
    Start with #BambuLab Basic Black
    At layer #8 (0.72mm) swap to BambuLab Matte Dark Green
    At layer #10 (0.88mm) swap to BambuLab Basic Mistletoe Green
    At layer #11 (0.96mm) swap to #BambuLab Basic Black
    At layer #12 (1.04mm) swap to BambuLab Matte Mandarin Orange
    At layer #13 (1.12mm) swap to #BambuLab Matte Ivory White
    At layer #14 (1.2mm) swap to BambuLab Basic Red
    At layer #18 (1.52mm) swap to BambuLab Matte Marine Blue
    At layer #20 (1.68mm) swap to #BambuLab Basic Bright Green
    At layer #24 (2mm) swap to #BambuLab Matte Ivory White
    At layer #26 (2.16mm) swap to BambuLab Matte Mandarin Orange
    At layer #29 (2.4mm) swap to #BambuLab Matte Ivory White for the rest.