So this is yet another candy dispenser suitable for Nutella glass, but bit more sophisticated :)

You can use any Nutella glass with or without the top part (thread) adapter, the basic (without adapter) fits 1000 ml glass while with the adapter printed it also fits the smaller one.

No glue, magnets, threads, bolt needed, everything is printed (except the Nutella glass) :)

How to print?

Generally use any layer height you wish, I have printed it with layer height of 0.4 with 0.4 mm nozzle and 0.66 walls, I'll leave the settings up to you. The model is designed to be able to print on every printer, clearances are good enough as 0.25 (maybe more).

• Bottom part
  • Print with supports (when finished, you can take them of or leave it, it's up to you)
  • Print with any layer height
• Top part
  • My printer can print it without supports, I'll leave this up to you
  • Print with any layer height but I suggest 0.3 max because of the thread
• Screw part
  • Print as is, laying on it's side, it will prevent Z wobble
  • Print with supports
  • I suggest layer height 0.2 as it is moving thing inside and you want it to be smooth
• Clip part
  • Print as you wish, clearances are very high but I suggest 0.2 as it is small part
• Adapter part
  • Coming soon

How to assembly?

• Put the screw inside the bottom part
• Put the top part on top of the screw and bottom part
• Use clips to lock top and bottom part together
  • They are made longer so it is easier to manipulate the clips inside the holes
  • No need to push them manually all the way down, they'll get pushed down by screwing glass container on top of the whole print

How to disassemble?

• Just push together the clip legs from the bottom and push them up, don't forget to take off any candy container
• Parts are now free and you can take them apart as you wish

Smaller Nutella glass?

• Just screw the adapter on the bottle first and then screw it all ( :D ) into the dispenser