Bambu Lab P1S / P1P External Hygrometer Humidity Meter Stand with Draft Holes Remixed by pathetap

Remixed by

pathetap

3D Printer>3D Printer Accessories

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

Rainy Design - 0.2mm layer, 2 walls, 10% infill

Designer

33 min

1 plate

4.9(11)

Radial Design - 0.2mm layer, 2 walls, 10% infill

Designer

33 min

1 plate

4.3(4)

Rainy Design - 30d Tilted, 0.2mm layer, 2 walls, 10% infill

Designer

32 min

1 plate

5.0(1)

Radial Design - 30d Tilted, 0.2mm layer, 2 walls, 10% infill

Designer

33 min

1 plate

Boost

Released

Description

This design is a rebuild which was inspired by Denis' design.

I was unhappy with the fact that the original model closes off the back of the sensor, which is where the data is collected from. As such I did not feel confident in overly trusting its readings.

I also added fillets to make it look nicer and moved the orientation of the ejection holes so that the Hygrometer is naturally inserted in the upright position.

There are two designs to choose from, though I personally ended up using the Radial design.

Comment & Rating (24)

@spadebits2

It would be good if there was a version for the hygrometers with the clips on an angle. Could probably have the one model suit both types.

The designer has replied

@pathetap

Hey, thanks for the reply. Quite a simple fix really, is it about a 30 degree angle? I own none of those types to verify myself.

@spadebits2

Yes I believe it's 30°, that's what other models say it is. looks about right in your image. I'm happy to test print it if you make the model. Cheers!

@pathetap

Replying to @spadebits2 :

I added the new configurations to the print profiles yesterday, hope it suits!

(Edited)