The other side mount spool adapters weren't quite what I wanted so I designed this one.
This adapter will not interfere with the PTFE tube coming from the AMS unit like some others did.
You will need (4) M3 x 20mm screws and (2) M3 nuts to use this adapter.
Warning: If you print a third party profile you may not be getting the latest version or the highest quality print.
If you like this project, please don't forget to ❤ Like and ★ Rate!
2023-04-20: I printed Bambu Lab Spool Roller by thrutheframe and I needed to mount the stock spool holder upside down. The original design prevented this because the counterbore was only on the right hole. I've updated the model to counterbore both of the bracket screw holes.
2023-03-10: Reworked the slots and added holes to force more walls and produce a stronger arm.
2023-03-09: Changed end fillets to chamfers to assist with bed adhesion.
I printed this with a 0.4mm nozzle, 0.2mm layer height, 8 perimeter walls, and 50% gyroid infill so that's a good place to start for a strong result.