NASA Fabric: Football (No AMS Needed)
Print Profile(2)
Bill of Materials
.jpg)
Description
Boost Me (for free)
Please Boost if you like my model
PLEASE READ! Important Notes:
- CLEAN YOUR BUILDPLATE AND USE GLUE BEFORE PRINTING! LAYER ADHESION IS VERY VERY IMPORTANT
- USE PLA MATTE or PLA BASIC. This model has not been tested with silk filaments. I do not recommend using them due to the potential for over extrusion which can cause the layers to fuse
- Use a layer height of 0.16mm. Do not change this value. If it does get changed, the color swaps will not be applied to the appropriate layer and the part will come out looking off.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
This model uses 62 4x2 magnets.
Maker's Supply Store - https://us.store.bambulab.com/products/round-magnet?id=42102911074440
Amazon Link - https://www.amazon.com/dp/B0F4MYLY85
Print Settings:
Filament: Only PLA matte or PLA basic
Layer height: 0.16
Walls: 4
Wall Generator: Arachne
Top layer pattern: Hilbert Curve
Color Swaps:
WARNING!! LAYERS CORRESPOND TO A LAYER HEIGHT OF 0.16. IF YOU CHANGE THE LAYER HEIGHT THEN THE COLORS WILL BE PUT DOWN IN INCORRECT PLACES!!
Start: Black
Layer 55: Brown
Layer 59: White
Magnet Assembly:
The magnets will need to be glued in. Start putting magnets of the same polarity on one side of each lobe. Work your way around clockwise. Once all the magnets with the same outward facing polarity are assembled, flip the magnets over and repeat.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (35)