RC Car - Wire Clip ( 14awg)
Copyright Claim
RC Car - Wire Clip ( 14awg)
Boost
42
57
10
Print Profile(2)
Wire Clip 14awg - 0.2mm layer, 2 walls, 100% infill
Designer
10 min
1 plate
wire clip 14awg - oversized
Designer
11 min
1 plate
Open in Bambu Studio
Boost
42
57
10
0
91
106
Released
Description
Updated:
I have added an oversize print profile, this is scaled up to accommodate some 14awg wire that has a thicker coating.
Simple Cable management clip for RC Car wires. This was designed for 14awg wire. The fit is supposed to be snug, but scale the model up if needed.
Comment & Rating (10)
All
Print Profile
Wire Clip 14awg - 0.2mm layer, 2 walls, 100% infill
Las piezas quedan demasiado ajustadas al cable 14awg.Reescalando puede servir.
(Edited)
0
Reply
Print Profile
Wire Clip 14awg - 0.2mm layer, 2 walls, 100% infill
I printed it in Bambu std Black PLA. It is sized incorrectly for the silicone covered wire I use. perhaps if it is printed in TPU it might be useable.
0
Reply
Print Profile
Wire Clip 14awg - 0.2mm layer, 2 walls, 100% infill
Worked really well, for 13 AWG wire I needed to scale up to 116,66% (HW XERUN ESC)
0
Reply
If you have Hobbywing XERUN ESC with 13 AWG cables, you need to scale up to 116.66% fits perfectly ;) Printed in PETG on Textured Plate. If you are printing more than 4 at a time, I strongly recommend adding a 5 mm brim
0
Reply
perfect
0
Reply
Print Profile
Wire Clip 14awg - 0.2mm layer, 2 walls, 100% infill
Thanks for sharing.
0
Reply
Print Profile
Wire Clip 14awg - 0.2mm layer, 2 walls, 100% infill
0
Reply
Print Profile
Wire Clip 14awg - 0.2mm layer, 2 walls, 100% infill
0
Reply
Print Profile
Wire Clip 14awg - 0.2mm layer, 2 walls, 100% infill
0
Reply
Print Profile
Wire Clip 14awg - 0.2mm layer, 2 walls, 100% infill
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld