Wolverine and Sabertooth (X Men) (5 Colour) - Free 3D Print Model

Search models, users, collections, and posts

Side Quest Hues

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

P1S

H2C

X2D

H2D Pro

X1E

P2S

X1 Carbon

H2D

A2L

H2S

P1P

0.08mm layer, 2 walls, 100% infill

Designer

5.7 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Project: SF1.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.4mm

    #080a0d PLA BambuLab Black Transmission Distance: 0.3
    #00358e PLA BambuLab Basic Blue Transmission Distance: 4
    #9d2235 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6
    #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4
    #ffffff PLA #BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 5 unique filaments

Swap Instructions:
    Start with BambuLab Black
    At layer #8 (0.72mm) swap to BambuLab Basic Blue
    At layer #11 (0.96mm) swap to BambuLab Basic Maroon Red
    At layer #14 (1.2mm) swap to BambuLab Basic Sunflower Yellow
    At layer #21 (1.76mm) swap to #BambuLab Matte Ivory White for the rest.