Dragon HueForge
Print Profile(1)
Description
Depend on the white you have will give different result
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 1.2mm and the Actual Thickness is 1.2mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#c1101d PLA Kexcelled Red Transmission Distance: 4.5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Jade White
At layer #12 (1.04mm) swap to Red for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)