Crossbow Kit Card (fully printed)
Printschnitzel.at
Shared by
Copyright Claim
Crossbow Kit Card (fully printed)
Printschnitzel.at
Shared by
Boost
204
456
79
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
19 min
1 plate
Boost
204
456
79
0
580
560
Released
Description
Appreciate the design? Consider supporting my work by following my account :)
[Description by original designer]
It's a fully printed, pocket size crossbow
Have fun!
don't hurt anyone
How to make it
- print the file kitcard_crossbow.stl
- seperate all the parts (maybe using a small wire cutter)
- take the part with the R and put the pins in
- connect the bow with the middle part
- put together the two sub assemblies
- add the trigger
- now the part with the L
- put on the bowstring
- load and shot
changelog:
#8.8.23 optimized geometry of bow and changed g-code to petg on MK3
Comment & Rating (79)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
very accurate
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
cool print. I like it.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Thanks for sharing this model to the platform!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Fácil de armar, funciona muy bien.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Quick and easy print. Might need to go to the original on printables for assembly instructions.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
good
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
This doesn't really function. The bolts do not stay in place on the crossbow, the string can't hold them in place like in the photos, and the trigger doesn't seem to work at all. If you look at the photos and then at the actual model files, the bolts may be different. It looks like the ones in the photos have a cutout on the end to better hold the bowstring.
The design is really cool but it's not quite there.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed nicely, a very fun toy. Printed in Bambu PETG to hopefully reduce string snapping.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Need morw
0
Reply
please a1 mini version!!!
0
Reply
The user shared this model, but is not the original creator of it.
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRemixes (1)
Related Models
© 2024 MakerWorld