Woman & Dragon Hueforge

Project: Woman and Dragon_V2_Combo_6Colors.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 108.22x162.6mm in size

You may print at higher layer heights below the Base Thickness of 1.52mm

The Max allowed Thickness is 3.52mm and the Actual Thickness is 3.52mm

Filaments Used: (* = Owned)
#000000 PLA Sunlu Meta Black Transmission Distance: 1
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#cd007b PLA BambuLab Basic Magenta Transmission Distance: 3
#f67405 PLA PolyLite Orange Transmission Distance: 7.5
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
#ffffff PLA Sunlu Meta White Transmission Distance: 8

This print uses 6 unique filaments

Swap Instructions:
Start with Black
At layer #21 (1.76mm) swap to Red
At layer #26 (2.16mm) swap to Magenta
At layer #28 (2.32mm) swap to Orange
At layer #31 (2.56mm) swap to Yellow
At layer #34 (2.80mm) swap to White for the rest.

For only one AMS, start with 4 colors as follows:

Slot 1: Black
Slot 2: Red
Slot 3: Magenta
Slot 4: Orange

Pause has been added and swap filaments as follows:

Slot 1: Black → White
Slot 2: Red → Yellow