Hueforge - Charizard

Relive your childhood with this Charizard 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.8mm

The Model is 141.33x200mm in size

You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 3.2mm and the Actual Thickness is 3.19996mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #ff9016 PLA BambuLab Basic Pumpkin Orange  Transmission Distance: 5.5
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
    You do not set Layer Swaps in the slicer. Instead each color is a separate STL file.
    The file is named with the piece (Base or Nest) and filament color.
    Load all STLs for one piece at once — your slicer will ask if it is a Multi-part model. Select yes.
    Assign filaments by color name in the slicer's Object view.
    Print everything together. No assembly required after printing.

Color Drop Printing Instructions:
    This model has been split into 1 nested pieces.
    Each piece is split by color for color-by-object printing.
    Original height: 3.04 mm
    Tallest piece: 3.04 mm
    Height saved: 0.00 mm