Ckye-Pod Enhanced Knobs
Print Profile(1)
Description
Ckye-Pod Enhanced knobs for legs. The back push button caps are sized to fit my bipods! You may need to scale them in the slicer to get a nice press fit for your Bipod.
****There are 2 plates, one for .6 Nozzle which I found works best with ASA and one for .4 Nozzle. Note the .6 Nozzle plate may make the shaft of the knob a touch to big and will require some sanding to get a correct fit. The .4 Nozzle should be fine as is. I recommend using ASA but PETG should work just fine as well.****
Both the .6 and .4 Nozzle plates require the use of a ¾" long 8-32 caps screw bolt. I run a 8-32 tap threw the know then epoxy the bolt into the knob using JB Weld Plastic bond epoxy.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (6)