Model Remix (Please read it all)

Bin dimensions: 225x225x265mm (or 225x225x365mm with the extension) so it fits quite a LOT of mess before needing to be emptied.

---

The Body Vase can be used by itself and should be printed in Vase mode. It's a solid model.
I highly suggest using the following settings (if not the project files are used):

• Line/wall width: 0.8 mm
• First layer width: 0.8 mm
• Bottom layers: at least 3
• Layer height: 0.28 mm

I uploaded the .3mf files with the settings.
You can change the material etc… but it contains the 0.8 settings for thicker walls. You can print it fine with the default 0.4 Nozzle. Makes the Bin a lot more rigid but still print fast.

---

The Complete Lid consists of 2 parts. You can print them together at once and move the trapdoor a little to release them after printing. Or if you want to mix up the colors without AMS, I added them separately as well. The Lid Frame that comes alone is the remixed version from: https://makerworld.com/es/models/18284 , i prefer this one because the Lid keeps in place.

---

The Extension gives 100mm extra high, it comes in a separate model because the print volume of the printer, it keeps in place by an insert in the body but i glued it to be permanent. I highly recommend to print the body base and the extension from my tested 3mf, i cannot assure you the right fit if you slice the Body Vase with another settings.

---

I uploaded four different print profiles for the differents parts:

- Bodyvase

- Extension

- LidFrame2Colors

The Model Pic was printed with this ones.

- CompleteLid (just in case you want to print it in one color and one shot, but the frame isn't the updated version)