Bambu Lab P1P Riser for ARC Enclosure
Copyright Claim
Bambu Lab P1P Riser for ARC Enclosure
Boost
49
98
26
Print Profile(1)
0.2mm layer, 2 walls, 30% infill
Designer
17.3 h
3 plates
Boost
49
98
26
0
317
226
Released
Description
Bambu Lab P1P Riser with Vent and LED for ARC Enclosure.
In my project I'm using WLED with SP511E driver and MQTT connectivity through Home Assistant to control colors of LED strip, for eg. red for EMS errors and green for print end depending on available states.
Demo on YT: https://youtu.be/KUD3p7XB7Do
Riser have vents and 45 degree mounting bar for led strips. Between riser and glass I'm using 2mm foam tape around edges. Caps for vents are also included with mounting clips for ARC enclosure.
Comment & Rating (26)
All
Print Profile
0.2mm layer, 2 walls, 30% infill
when using the printing profile the interior was ruff not something that I would upload
sorry
The designer has replied
0
Reply
Did you print this model or just collecting points? What was your problem with profile?
0
Reply
Replying to @Szaman
I printed the first first plate when I saw the result I decide to stop it
The uper view was ok
It's under that it was awfull
0
Reply
Replying to @NurseKatherine
Still don't know what's the problem. Please show picture of result.
0
Reply
Print Profile
0.2mm layer, 2 walls, 30% infill
Spot on. Just waiting on my upgrades to get to the P1S :) should be here this week and then will have a complete P1S :) thank you !
0
Reply
Print Profile
0.2mm layer, 2 walls, 30% infill
Perfect
0
Reply
Print Profile
0.2mm layer, 2 walls, 30% infill
printed in clear abs.
0
Reply
Print Profile
0.2mm layer, 2 walls, 30% infill
0
Reply
DNO
The designer has replied
0
Reply
Dzięki za opinię :)
0
Reply
Printed for my P1S and riser to big did not change any settings to upscale or downscale
0
Reply
Print Profile
0.2mm layer, 2 walls, 30% infill
Print worked great, went together pretty easily and looks great. My PTFE thanks you! :D
0
Reply
Print Profile
0.2mm layer, 2 walls, 30% infill
I printed this, but decided I wanted some working vents, So I ended up deciding to design and print a different one. this printed very nice
0
Reply
Print Profile
0.2mm layer, 2 walls, 30% infill
just printed, atm is not in use
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld