Edit: I just found out that @jerrymk_985120 made the OG Clickfinity. That's where all the magic happened. Sorry I didn't acknowledge all your hard work earlier, Jerry. I couldn't have done what you did.

Recently found NoWarrenty's Clickfinity, and while I love the idea, I wanted something a little more solid for the drawers in my tool cabinet. I've been using grizzie17's Gridfinity Refined plates and love the way they can be attached together, so I decided to see if I could combine the two. And after a lot of trial, error, and head scratching, I think I made it work.

I also reworked the wedge connectors to better fit these plates.

I've also added plates to use as a movable base or just make the entire section more solid, along with trim sections if you just want to dress up the edges.

I've added Alignment Squares if you want to include plates into your model. Space the squares 42mm apart to match the size of the plate you are using. Allow 3mm depth and 1mm on the X and Y axis for fitment. Example: if you are using a 3x5 plate measuring 126mmx210mm, have a 127mm x 211mm x 3mm cutout.

I print the plates in PETG. Per the original model details; “Print with PETG, ABS, ASA, or Nylon. Do not use PLA or PLA+ as these materials creep under constant load, causing the grid to lose its grip over time.”
PLA will work for the trays and trim.

I give you Clickfinity Refined. Huge thanks to NoWarrenty, grizzie17, and of course Zack Freedman for the original Gridfinity. This is a result of all of their collective hard work.

This is still a work in progress, so comments, suggestions, and remixes are very much welcomed.

7/8/23 - Added a Kobalt Mini Toolbox plate insert.

8/1/23 - Added Baseplate Trays for looks and portability. Also added trim sections to dress up the sides without having to print out an entire tray.

8/13/23 - Added Preds Gridfinity Storage Box base modified to accept Clickfinity Refined baseplates. You will need to print out the rest of the hardware from his posting. (These are for the newer, parametric models)

8/17/23 - Fixed the corner issue in the Preds box; thanks to @gniticxe for pointing out my error.

8/23/23 - Fixed Preds box models after discovering a height issue. Added Alignment Squares.