Foldable hook
Copyright Claim
Foldable hook
Boost
158
296
75
Print Profile(3)
sets 0.15mm/0.20mm layer, 3 walls, 25% infill
Designer
2.6 h
5 plates
1 hook, 0.2mm layer, 6 walls, 25% infill
33 min
1 plate
A1mini PLA 0.15mm layer, 3 walls, 25% infill
37 min
1 plate
Boost
158
296
75
6
602
762
Released
Description
Folding hook. Size 40x60x13mm (without cover) 48x24x13 (with cover)
My print settings
- Material: PETG
- Layer height: 0.15mm
- Perimeters: 6
- Orientation of the hook on the bed: Side
- Supports: No
Updated (added)
Added alternative cover mounted under frame.
For easier printing and better building I made cover, which is screwed with frame to the wall.
Print settings
- Material: PLA or PETG
- Layer height: 0.15mm
- Perimeters: 2
- Supports: No
Comment & Rating (75)
All
Boosted
Print Profile
sets 0.15mm/0.20mm layer, 3 walls, 25% infill
very nice, works like a charm, and is pretty strong, and clever designt
0
Reply
Print Profile
1 hook, 0.2mm layer, 6 walls, 25% infill
printed nicely
took double-sided tape instead of screws
worked nicely
0
Reply
Print Profile
1 hook, 0.2mm layer, 6 walls, 25% infill
👌
0
Reply
Print Profile
1 hook, 0.2mm layer, 6 walls, 25% infill
Printed with eSun PLA+. Glueing parts was needed
0
Reply
Print Profile
sets 0.15mm/0.20mm layer, 3 walls, 25% infill
Printed in Petg work well. the sleeve on the petg is a tad loose but works well for me
0
Reply
Print Profile
sets 0.15mm/0.20mm layer, 3 walls, 25% infill
bitte nicht die Fliesen beachten(Badezimmer kommt neu) 😂 Druck ist sehr schön geworden! Ich würde sagen perfekt!!!
0
Reply
Print Profile
sets 0.15mm/0.20mm layer, 3 walls, 25% infill
0
Reply
Print Profile
sets 0.15mm/0.20mm layer, 3 walls, 25% infill
Turned out amazing. I printed it at 150%, and printed it in white and black pla from bambu. It is so strong and printed so fast in 3 hours total for all 9 pieces. I highly recommend printing as a home gadget.
0
Reply
Print Profile
1 hook, 0.2mm layer, 6 walls, 25% infill
Wife wanted a folding hook for her headset...Wife got a folding hook for her headset. a 15 minute print that does exactly what it says on the packaging. Good job.
0
Reply
Print Profile
1 hook, 0.2mm layer, 6 walls, 25% infill
worked great I put it in my study so I can hang up my coat when I sit down for work
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Share AlikeRelated Models
© 2024 MakerWorld