Artemis II astronauts Hueforge
Print Profile(1)
Bill of Materials
Description
If you like my models, please comment, share your prints, or you can purchase filaments through my links. Every bit of support keeps me motivated to make more awesome stuff. Thanks a lot!
Demon Slayer series: Demon Slayer Hueforge | Collection - MakerWorld: Download Free 3D Models
One Piece series: OnePiece_Hueforge | Collection - MakerWorld: Download Free 3D Models
Pokemon series: https://makerworld.com/en/collections/22946087-pokemon-hueforge
Dan Da Dan series: https://makerworld.com/en/collections/7165703-dandadan_hueforge
Marvel series: Marvel_Hueforge | Collection - MakerWorld: Download Free 3D Models
Animal series: Animal_Hueforge | Collection - MakerWorld: Download Free 3D Models
Credit: NASA
Respect to the astronauts: Commander Reid Wiseman, Pilot Victor Glover, Mission Specialist 1 Christina Hammock Koch, and Mission Specialist 2 Jeremy Hansen.
Project: Artemis II Astronauts.hfp
Print at 100% infill with a layer height of 0.06mm with a base layer of 0.12mm
The Model is 156x234mm in size
You may print at higher layer heights below the Base Thickness of 0.9mm
The Max allowed Thickness is 2.88mm and the Actual Thickness is 2.88mm
#000000 PLA Basic Black Transmission Distance: 0.1
#c00d1e PLA Basic Red Transmission Distance: 3.7
#fce300 PLA Basic Yellow Transmission Distance: 5.2
#814100 PLA Brown Transmission Distance: 2.8
#ffffff PLA Basic Jade White Transmission Distance: 5.8
#00358e PLA Basic Blue Transmission Distance: 4
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #16 (1.02mm) swap to Red
At layer #23 (1.44mm) swap to Yellow
At layer #24 (1.5mm) swap to Brown
At layer #26 (1.62mm) swap to Jade White
At layer #34 (2.1mm) swap to Black
At layer #36 (2.22mm) swap to Blue
At layer #37 (2.28mm) swap to Jade White
At layer #39 (2.4mm) swap to Black
At layer #40 (2.46mm) swap to Jade White for the rest.
For single AMS users, start with 4 colors as follows,
Slot1: Black
Slot2: Red
Slot3: Yellow
Slot4: Brown
Pause was set at Layer 25 to allow color swap:
Slot2: Red --> White
Slot3: Yellow --> Blue
******************************************************************************************
Boost Me (for free)
Not just 3D prints—each piece is a layered illusion of color, depth, and passion. Thanks for your visits, any feedback will be appreciated!
******************************************************************************************
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)