Chess 3

Project: Chess 3.hfp

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 133.1x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.56mm

    PLA Bambu Basic Black  Transmission Distance: 0.1
    PLA BambuLab Basic Blue Gray  Transmission Distance: 2.6
    PLA Bambu Basic Light Gray  Transmission Distance: 1.1
    PLA+ Esun Bone White  Transmission Distance: 4.9
    PLA Bambu Basic Jade White  Transmission Distance: 6.3
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (0.64mm) swap to Blue Gray
    At layer #17 (0.8mm) swap to Light Gray
    At layer #20 (0.92mm) swap to Bone White
    At layer #27 (1.2mm) swap to Jade White for the rest.
 

FRAME PRINTED SEPARATELY!