Superspace clips

Superspace clips to help hold panels together. Adding them to this platform to enable printing from mobile phones. I've added one of each v2 long version of the clip to the project, so select which clip you need and adjust quantity to suit.

Would guess petg but have used pla, they are just a bit less robust.

All credit to ryamoo - 

https://www.printables.com/model/233645-superspace-clips

Description from ryamoo -

My toddler isn't fully aware of where his feet are at all times, so sometimes he'll accidentally knock down our Superspace build (getsuperspace.com if you don't know what they are - magnetic building tiles for dens and other structures). 
I wanted some clips to help hold it together, especially when outdoors as our garden is very gusty and the wind knocks our builds down. 

I've modelled the Superspace panels, assembled them, then used that as a guide to getting correct angles and positions. 

There's 3 clip angles, each in a long and short version:

• Straight clip, for holding together long walls. 
• 90 Degree clip, for corners or base+upright panels
• Roof clip, for when building a 4 sided roof with the triangles or trapezoids

If more clips for other angles are needed, show me a photo of the build and I'll try to make them. If they seem too weak, let me know where they break and I'll try to strengthen the model. 

Printing should be fairly easy - they should already be orientated for printing, but you want to print them lay flat as shown in the Photos. Note the photos show some test prints that were narrower - originally 5mm, but I've widened to 10mm. They can be stretched if you think you need them wider than 10mm. 

Edited - V2

I've tweaked the clips slightly so there's a little more surface area for the first layer to stick to the bed. Those are now in the “V2” folders. V1 have been moved to a V1 folder just in case you need those versions still. 
I've also added STL files for those that need them instead of 3MF.