RestoreDoctor

cover

plate_1.png

0.2mm layer, 4 walls, 30% infill

todanator

IMG_3689 copy.jpg

Much smaller - used for something like a frame. Prints without support since the bridged location is only about 10mm Prints fast with adaptive cubic infill.  Added a brim for only for safety.

0.2mm layer, 2 walls, 20% infill

Dr.EmmettBrown

IMG_20250515_064845_edit_200246226387100.jpg

IMG_20250515_064853_edit_200147257916981.jpg

<ul><li>PLA as base (but can be changed to PETG easily)</li><li>increased line width</li><li>decreased infill</li><li>added adaptive layer height → 2h30 print time @ 106g…feels sturdy enough, so far. …still, you might need to change from tree to normal support and deactivate support bridges. Seems like Studio is not consistently remembering this setting from presets.</li></ul>

0.28mm layer, 3 walls, 15% infill

Settings:<ul><li>0.20mm Standard +custom settings:</li><li>Wall loops min. 4</li><li>Outer wall: 60 mm/s</li><li>Infill min. 30 %</li><li>supports on - but don't support bridges see below</li><li> PETG preferred</li></ul><figure class="image"><img src="https://media.printables.com/media/prints/508823/rich_content/af2761c6-5b56-4335-80a4-fb21c46fe15b/thumbs/cover/800x529/png/winkel.webp"></figure>

Corner clamp - stackable

ASIA

Print Profile(3)

Description

Comment & Rating (50)

License

Related Models