Clamp for Windmill (Toroidal & Hexagon)
Remixed by
Clamp for Windmill (Toroidal & Hexagon)
Remixed by
Boost
165
269
124
Print Profile(3)
![[V1] 0.2mm layer, 5 walls, 25% infill](https://makerworld.bblmw.com/makerworld/model/US15e44672a4bf0/69823144/instance/2024-03-15_6d9c46a2c3e8c.jpg?image_process=resize,w_100/format,webp)
[V1] 0.2mm layer, 5 walls, 25% infill
Designer
3.1 h
2 plates
![[V2] 0.2mm layer, 5 walls, 25% infill](https://makerworld.bblmw.com/makerworld/model/US15e44672a4bf0/69823401/instance/2024-04-14_adaa461bdf8f8.jpg?image_process=resize,w_100/format,webp)
[V2] 0.2mm layer, 5 walls, 25% infill
Designer
3.3 h
2 plates
TPU version, 0.2mm layer, 5 walls, 25% infill
4.2 h
3 plates
Boost
165
269
124
10
900
693
Released
Description
Universal Clamp for Windmill
On the top Site it has a hole to fit perfectly the rod from Hexagon & Toroidal Windmill.
(Added V2 Print Profile with second hole for 0° and 90° mounting.)
Use the screw clamp to securely attach the wind turbine.
For example, to balcony railings, window sills or other boards and poles.
Screw Clamp fits up to 45mm square and Ø45mm pipes!
If you only use the full size, i added a alternative short screw on build-plate 2 ✔
The Clamp uses a simply mechanism which is easy to print, it does the job great! ✔
I printed in Basic PLA without problems ✔
Assembly:
- Screw the handle in, you can grease a bit if you want
- Place the loose jaw in place and screw in one time completly togheter. The Cone from the Screw should snap in the loose jaw.
- Place the rod from the windmill in the hole on the top.
- Find a good place and screw on gently
Thank you for leave a like…..Happy Printing😉👍
Commercial license you can get here:
Comment & Rating (124)
All
Print Profile
[V1] 0.2mm layer, 5 walls, 25% infill
Easy print... slightly edited 😜
The designer has replied
1
Reply
Slightly 😂😂 Thanks for rating👍🏼
0
Reply
Any chance you can upload that profile please?? :)
0
Reply
Print Profile
[V2] 0.2mm layer, 5 walls, 25% infill
Trotz einer Warnung bedingt frei schwebendem Bauteil. Sauber gedruckt.
The designer has replied
1
Reply
Super! Danke für deine Bewertung 👍
0
Reply
Boosted
Print Profile
[V2] 0.2mm layer, 5 walls, 25% infill
Super !
The designer has replied
1
Reply
Thank you very much 👍🏼
0
Reply
Print Profile
[V1] 0.2mm layer, 5 walls, 25% infill
Nice!!!!
The designer has replied
1
Reply
Thank you for your Review😉👍
0
Reply
Print Profile
[V1] 0.2mm layer, 5 walls, 25% infill
fits perfect! and I no longer need to use zip ties! 😂
The designer has replied
1
Reply
I get the idea 💡 from your reel 😂 Thanks for rateing👍
(Edited)1
Reply
Print Profile
[V1] 0.2mm layer, 5 walls, 25% infill
I had to make it a bit bigger, but I used the original print profile. It holds the windmill well.
The designer has replied
1
Reply
Thank you for the first comment here 🥇 You just scaled it? Which size did you need?
0
Reply
Print Profile
[V2] 0.2mm layer, 5 walls, 25% infill
Easy Print and work Perfectly.
Printed with Bavaria PETG Green.
1
Reply
Print Profile
[V1] 0.2mm layer, 5 walls, 25% infill
Perfect!
1
Reply
Print Profile
[V2] 0.2mm layer, 5 walls, 25% infill
Very useful for my Windmill! Thanks for sharing
1
Reply
Print Profile
[V1] 0.2mm layer, 5 walls, 25% infill
Universally design, worked good!
1
Reply
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (2)
Related Models
© 2024 MakerWorld