Bambu Lab AMS Desiccant Holder Set by stephen.mott

stephen.mott

3D Printer>3D Printer Accessories

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.28mm layer, 2 walls, 15% infill

Designer

7.2 h

1 plate

5.0(9)

Open in Bambu Studio

Boost

112

Released

Description

This is another desiccant holder for the Bambulab AMS system, I designed one to fit the hygrometer that I'd bought to fit in another model, but it didn't fit. I made a whole set just so they'd match.

This is the hygrometer I've tried and tested:

https://www.amazon.co.uk/dp/B07JDSHD4Z?psc=1&ref=ppx_yo2ov_dt_b_product_details

This is the model in OnShape in case you have a different hygrometer:

https://cad.onshape.com/documents/b8abb030d9f47d1e25cd69e7/w/ad86e8b3748b17221697810a/e/f33e1f6d168b00b8267cc6a7?renderMode=0&uiState=65f20319b0505a4a5d57b7ec

The v3 Small Container makes the lid rail slightly larger and adds a cross bar like the large containers.

bambulabams

Comment & Rating (28)

@houmark

Boosted

@stephen.mott Nice models. Thanks. I printed all these. The large ones fit well, including my hygrometer was a perfect fit, but the small ones on the sides, I am not able to slip into their spot on either side — they seem to be a bit too large. Any suggestions?

The designer has replied

@stephen.mott

Yea the end ones are a bit snug, I'll make them a bit smaller..

@houmark

Boosted

Replying to @stephen.mott :

@stephen.mott Thanks, in my case maybe both depth and width could be an issue. I've tried figuring out which it is but didn't have a solid conclusion and I was afraid of breaking the first stage feeders. Let me know when you have them tweaked so I can quickly print them and provide feedback.

@stephen.mott

Replying to @houmark :

I've put up a new one, currently being verified, I've decreased the width and changed the shape slightly so it slides in easier too, its the "Desicant Holder Small - Container v2.stl" file.

@qballbeg

Print Profile

0.28mm layer, 2 walls, 15% infill

orange was empty half way. looks good. waiting for the hydrometer.

@user_210513665

Boosted

Even tho (some of) my Silica pearls are a bit too small for the holes i like the designs! Printed without problems!

The designer has replied

@stephen.mott

Thanks, yea the ones I use are normal ok, but I did find the other week, the small ones are at the bottom of the pot, so now I fill them give it a shake to get any small ones out..

@Paul_Biod

Hi, what kind of silica do you put inside ? any link ? thanks

The designer has replied

@stephen.mott

I use "Fonday Premium Moisture Indicating Silica Gel Desiccant Beads Orange to Green" but it was just the first reusable one I came upon on Amazon, seems to work fine though, this is the UK link: https://www.amazon.co.uk/dp/B0BXJNJ73M?psc=1&;ref=ppx_yo2ov_dt_b_product_details

@Paul_Biod

Replying to @stephen.mott :

thanks for replying. Have a good night ;)

@user_3615708823

Does the hygrometer holder require supports or will it print okay without? Default orientation?

The designer has replied

@stephen.mott

It will print without, but there will probably be a bit of droop to clear afterwards, depending on your filament. Yes print in the default standing up orientation.

@POPrints

Boosted

Print Profile

0.28mm layer, 2 walls, 15% infill

Minor layer adhesion at the top of one item. Easily fixed with a droplet of glue. Amazing quality.