Advancedtechworldwide

cover

unnamed.jpg

plate_1.png

423438381e5d5f32.jpg

Project: Psylocke_RedVersion_V1_6Color.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 108.4x162.6mm in sizeYou may print at higher layer heights below the Base Thickness of 1.52mm The Max allowed Thickness is 3.52mm and the Actual Thickness is 3.52mm     #000000 PLA Sunlu Meta Black  Transmission Distance: 1     #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3     #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4     #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6     #ff5869 PLA BambuLab Basic Pink  Transmission Distance: 8     #ffffff PLA Sunlu Meta White  Transmission Distance: 8 This print uses 6 unique filaments Swap Instructions:     Start with Black     At layer #21 (1.76mm) swap to Blue Gray     At layer #23 (1.92mm) swap to Red     At layer #28 (2.32mm) swap to Yellow     At layer #30 (2.48mm) swap to Pink     At layer #32 (2.64mm) swap to White for the rest.

0.08mm layer, 2 walls, 100% infill

Project: Psylocke_RedVersion_V1_6Color.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 108.4x162.6mm in sizeYou may print at higher layer heights below the Base Thickness of 1.52mm The Max allowed Thickness is 3.52mm and the Actual Thickness is 3.52mm     #000000 PLA Sunlu Meta Black  Transmission Distance: 1     #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3     #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4     #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6 (A pause is setup here)     #ff5869 PLA BambuLab Basic Pink  Transmission Distance: 8 (Swap out the BGray)     #ffffff PLA Sunlu Meta White  Transmission Distance: 8 (Swap out the Black) This print uses 6 unique filaments Swap Instructions:     Start with Black     At layer #21 (1.76mm) swap to Blue Gray     At layer #23 (1.92mm) swap to Red     At layer #28 (2.32mm) swap to Yellow(A pause is setup here)     At layer #30 (2.48mm) swap to Pink (Swap out the BGray)     At layer #32 (2.64mm) swap to White for the rest. (Swap out the Black)

This is a 6 color print, I&#39;ll upload a 4 color with a pause version, for those with only 1 AMS like me.

Print Profile(2)

Description

Comment & Rating (1)

License

Related Models

Psylocke Red Version Hueforge

Print Profile(2)

Description

Comment & Rating (1)

License

Related Models