Balloon Car Kit by Demetrius Batliner-McKindra

Demetrius Batliner-McKindra

Hobby & DIY>Vehicles

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

1.4 h

1 plate

4.0(2)

Open in Bambu Studio

Boost

Released

Description

Balloon Car Kit

Just cut the pieces apart and put axles through the hols and attach the wheels then of course, the balloon! :)

Comment & Rating (11)

@user_1701665186

Boosted

My grandson and I are so excited to build this car. I did set it at 0.2mm layer, 2 walls and 15% infill. The axels are to big to fit in either the slots in the car or the tires. what else do I need to adjust to make sure it will fit?

The designer has replied

@user_3675169253

sorry i will be posting a new model today which should be have bigger holes

@user_3675169253

the model is updated. hope this helps :)

@user_1701665186

Boosted

Replying to @user_3675169253 :

We printed it again and it seems to be the same size and problem. I’m not sure your updated file is the one available for download.

@J.paulsen

My child and I are so happy that it printed. But as another person mentioned, you can't install the car's axles or put the tires on. Any suggestion? Any chance you can share the original file so we can remix it? Thanks in advance.

(Edited)

The designer has replied

@user_3675169253

sorry i will be posting a new model today which should be have bigger holes

@user_3675169253

the model is updated. hope this helps :)

@user_4269256913

Print Profile

0.2mm layer, 2 walls, 15% infill

The designer has replied

@mariusc

Great!

@user_1701665186

Boosted

Thank you for sending the file. My grandson loves this design. I'm hoping we can make it work with a little tweak.

@Allprints_4

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed well but the axles are too big and do not fit the car or wheels.

(Edited)

Other Issues:Once this is actually updated. Can you add the updated axles to be printed by themselves instead of having to reprint the entire model again?

No more