Gap Test Snail (間隙測試蝸牛)
Copyright Claim
Gap Test Snail (間隙測試蝸牛)
Boost
36
42
10
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
28 min
1 plate
![[MiniFriendly]: 0.2mm layer, 2 walls, 10% infill](https://makerworld.bblmw.com/makerworld/model/US886a58cacd2488/58845966/instance/2024-03-14_c2aaf23324e39.jpg?image_process=resize,w_100/format,webp)
[MiniFriendly]: 0.2mm layer, 2 walls, 10% infill
29 min
1 plate
Boost
36
42
10
0
136
37
Released
Description
間隙測試(蝸牛)
1. 這個蝸牛是用來測試列印間隙精度的stl檔案，模型中的間隙距離包含
0.12mm/0.15mm /0.2mm/0.25mm/0.3mm/0.35mm
2. 只要0.2mm的圓形能夠轉動就算是精度沒問題的。
3. 影響列印的精準度的因素很多
A.線材直徑誤差或粗細不穩定。
B.機器調教問題，噴嘴磨損或平台不平整...
C.切片設定有問題。
可以內縮邊界來增加間隙，間隙調整參考下面連結
https://wiki.bambulab.com/en/software/bambu-studio/xy-hole-contour-compensation
4. 不管蝸牛的圓能否轉動，還是可以拿來當鑰匙圈，別浪費了材料。
Comment & Rating (10)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
very good for testing
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
[MiniFriendly]: 0.2mm layer, 2 walls, 10% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld