Gran cuadro de Señor de los Nazgûl u otro brujo de the lord of the Rings creado con hueforge para impresion 3d

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Jayo Negro Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite Stone Blue Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 6

Swap Instructions:
Start with Negro
At layer #8 (0.72mm) swap to Blue Gray
At layer #14 (1.2mm) swap to Stone Blue
At layer #15 (1.28mm) swap to Jade White for the rest.