hueforge de the lord of the ring de los brujos de las peliculas
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Jayo Negro Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 6
Swap Instructions:
Start with Negro
At layer #10 (0.88mm) swap to Blue Gray
At layer #14 (1.2mm) swap to Yellow
At layer #15 (1.28mm) swap to Jade White for the rest.