Egg painting station, 100% printable, no supports by MatadorPrintor

MatadorPrintor

Household>Festivities

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

1.3 h

1 plate

4.4(7)

0.2mm layer, 2 walls, 15% infill

Designer

1.5 h

1 plate

Mini profile - 0.2mm layer, 2 walls, 15% infill

Designer

1.6 h

1 plate

PETG version w/ 3 models on a build plate.

4.9 h

2 plates

Open in Bambu Studio

Boost

Released

Description

Hello everyone,

This is a fully printable 3D model for an easter egg painting station. There are 3 components to it:

Base station
Screw
Screwcap with eggholder

The screw parts use manually adjusted M14 threads, and they should be printable without having to change any of the presets on your machine. There is an increased clearance on the threads, and the edges of the threads have been rounded over.

I printed this as is on my P1S and it fits perfectly.

There are 2 versions attached - one is directly from Fusion 360. I'd be honored to have someone improve upon the model, but it works quite good as is!

*Note that I have added a little block to strengthen one of the pillars.

Please let me know what you think!

Happy easter!

Comment & Rating (8)

@HotFix

Print Profile

0.2mm layer, 2 walls, 15% infill

This is such a clever idea. I switched to PETG because I was worried my kids wouldn't be gentle with it, and then I had to shrink the bolts and enlarge the nuts because of what I suspect is PETG shrinkage (as compared to PLA). I will post that as a separate print profile. Thank you for this great model. My kids and a friend will be putting it to good use for Easter arts and crafts!