The Easter Bunny

Easter Bunny mosaic model.

 The model can be colored directly in the slicer to match your plastic colors. Supports printing with a large number of colors, even without AMS.

Printing Instructions

  In the slicer on the first table, color the parts as you like. You can use any colors of plastic.

Then arrange the models as shown in the example on tables 2-6. These tables are only an example of the layout and do not need to be printed.

The parts are designed to fit together with a slight force, allowing them to hold securely and prevent them from falling out.

If the parts fit too tightly, you can increase the model from the 2nd table by about 1%. 

You can also set different heights for the elements and achieve multi-color, multi-layer printing, even without using AMS.