My version of CTC printer enclosure. I used 2 mm acrylic glass plate.
On the photo I still use old version of wood hinge.
Needed:
2 cylindrical magnet (r=2,5mm h=3mm)
2 screws (10 mm) - my screw head additional 2,5mm but if your will be longer or shorter, you can use washers to align it with magnets
2 screws for door hinge (30mm)
And set of nuts and screws to mount it to 5mm wood frame.
Fill free to remix, edit and whatever.
I attached Design Spark mechanical source files.