This is a simple riser designed for the Xtool M1
it allows you to rise 50mm or 100mm or even beyond that as it is designed to extend itself
there is a tolerance of 0.4mm to make sure it can fit the extension
please use at own risk
it can be printed with out supports
but make sure you put the “knob” at the top for the best print result
the holes can be easy bridged and even if they are not bridged nicely it will still work
Settings i used:
5% infill
3 top/bottom layers
2 walls
Gyriod
PETG
to increase rigid you could increase infill , but in my case it is strong enough with 5%
Enjoy
Greetings from PowerChaos