He is Rizzen Hueforge model for Easter.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Lilac Purple Transmission Distance: 2
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
Swap Instructions:
Start with Charcoal
At layer #7 (0.64mm) swap to Lilac Purple
At layer #10 (0.88mm) swap to Ice Blue
At layer #20 (1.68mm) swap to Lemon Yellow for the rest.