Easter egg kinder container, no supports by Rikskeff

Rikskeff

Household>Festivities

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

V2! 0.16mm layer, 3 walls, 15% infill

2.1 h

1 plate

4.7(23)

0.16mm layer, 3 walls, 15% infill

2.2 h

1 plate

4.5(36)

0.2mm layer, 3 walls, 25% infill

1.8 h

1 plate

4.4(8)

0.16mm layer, 2 walls, 10% gyroid infill

2.2 h

1 plate

5.0(4)

Boost

212

333

102

725

697

Released

Description

EDIT: There is now a v2 with better threads as some users had trouble with threads binding on v1.

IMPORTANT: Print in the same orientation as the model is displayed in picture 1. Like any other small print, don't print too fast as the layers wont have time to cool down before the next one. It is even more important on a model that has threads.

Fun easter egg with threads to hold one kinder egg. No need for supports.

You might have to screw and unscrew it a couple of times to get the threads running smooth.

Comment & Rating (102)

@user_42633645

Print Profile

0.2mm layer, 3 walls, 25% infill

I love both versions but for some reason I always have those fine hairs. this with both pla and abs. any ideas?

The designer has replied

@Luc1f3r

Is your filament dry?

@Rikskeff

Have you tried v2?

@user_42633645

Replying to @Rikskeff :

yes, I tried both versions

@mkukie78

Print Profile

0.16mm layer, 3 walls, 15% infill

Very sturdy print. definitely not a fragile egg. screwing it together is cery tight, you have to work it back and forth several times. Cute for the Nieces and Nephews Easter baskets! :)

@Rikskeff

Thanks for the post! If you find the threads too tight you can print v2 which has modified threads.

(Edited)

@user_1033207302

Replying to @Rikskeff :

I just tried to print, but can't close fully, thread is to tight. Not sure if I did something wrong, this is my first print. Anyway my kids was excited.

@AleUrs92

Print Profile

0.16mm layer, 3 walls, 15% infill

my third try wit bambu pla silk

The designer has replied

@Rikskeff

Looks like you printed bottom part in the wrong orientation

(Edited)

@M.verbeke

Please avoid making subsequent changes to the print profile, the print works very well as is. Turning objects over without support structures inevitably leads to incorrect printing results.