Please take the time to read before you print, thank you.
I had a few people asking for a version of the axolotl without a hole so here one is. If you want it
smaller you will need to scale it down in the slicer. You may also want to adjust the thickness by clicking on the model then scale
option then go back to the model and GRAB on to the blue tab and move up or down to your desired thickness!!!!!
THE MODEL IS LAYING FACE DOWN ON ITS FACE on the build plate for you already!
The textured side of the model when you take off your build
plate is the front of your model.
I do have this model posted on my patreon if you are interested in the commercial rights
to sell. The link to my patreon is posted on my profile.
-If you are having adhesion issues, please slow your machine down for the first
several layers.
-Please use glue adhesive if you are having issues with the print sticking
-Message me directly if you need ABSOLUTELY any help or have any questions.