DESCRIPTION

Modular organizer with many possible uses. I use mine to store screws, resistors and many other mechanical and elctrical compontents but it can be used for anything. It is completely modular to your needs. You can adjust the amount of space you need for your components as you need by printing the slots needed. If you need a larger or smaller cabin, feel free to scale the size in your slicer (remember to scale all parts by the same percentage).

PRINT RECOMMENDATIONS

Any kind of filament

.4-.6mm nozzle

.2mm layer height

15% infill for the cabin and the closer

20% infill for the slots

Gyroid infill

No supports are required for any part of the print (The slanted parts of the main cabin is printed with 45 degree angles)

Use a brim only on the “Thick Horizontal Slot” because you must print it vertically to avoid the use of supports