Multicolor magnet caps for your refrigerator, office, school, etc. Printed head down, layer 0.25mm, each character is 0,5mm high, so it needs only 2 layers of second filament and also no supports are needed.
CONTAINS:
HOW TO PRINT:
* Makerworld doesn't accept 3mf files with empty plates. The third plate included in zip file is empty, while that in profile here contains one cap with arrow.
VIDEO how to prepare Bambu studio for print is attached in .zip file (under raw files) or on Youtube.
BUY 15x5 NEODYMIUM MAGNETS from Aliexpress (or from elsewhere), for example here: cheaper or with 15-day delivery to the EU. Please note, I have a lot of these magnets from Aliexpress and the dimensions are always slightly different.
GLUE THE CAPS TO THE MAGNETS, I use cartridge glue such as Soudal FixAll Turbo, Den Braven Mamut Glue etc. Let them dry and you can start using them. Some magnets of the same size can be just enough to push into the cover and there is no need to glue them.