Chisel honing guide or jig. Top piece can be turned over which has grooves for 1/4, 1/2, 3/4 and 1 inch chisels as well as a 50mm plane blade.

Parts needed.

• 2 608 (7mm x 8mm x 22mm) bearings,
• 2 1" inch 5/16 hex bolts and wing nuts
• 1 2-1/4" inch 5/16 hex bolt and nut

I made sure this one was designed small enough so small blades can still be honed at lower angles if needed.

The 5/16 bolts can probably be replaced with M8 bolts but I live in US and imperial what I'm used to :)

Designed this after trying many other designs, as well as the cheap ones off Amazon and out of need to be able to reliably hone my chisels without fuss.