Summary:

Honkler/Clown World refrigerator magnet with no MMU/AMS needed for multiple colors, simply pause on layers to change filament. Magnet measures about 3.5"x3" (88mmx75mm) WxH.

Print settings:

PLA, 0.4 nozzle, 0.2 layers, 2 walls, 10% gyroid infill, classic wall, detect thin walls turned on, optional ironing. I also prefer a smooth build plate for magnets.

Magnets:

Designed for three 6x3 magnets. My magnets actual measurement was 6.0mmx2.7mm so the magnet hole is 6.3x3.2. I paused on the top magnet cavity layer and super glued the magnets in before resuming the print.

Filament changes:

Color order for filament changes: white, purple, orange, yellow, blue, red, green, black

If you stick with 0.2 layer heights:

• Layer 19 - Insert Magnets
• Layer 24 - Change White to Purple
• Layer 27 - Change Purple to Orange
• Layer 30 - Change Orange to Yellow
• Layer 33 - Change Yellow to Blue
• Layer 36 - Change Blue to Red
• Layer 39 - Change Red to Green
• Layer 42 - Change Green to Black

*Be sure to double check your slicer for layer pauses