If you don't want to use 5 colors to print, you could replace the green with gray, but I like the green tint it puts on Joker's hair. Enjoy!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Default White Transmission Distance: 5
PLA Default Black Transmission Distance: 0.3
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA Default Gray Transmission Distance: 2.5
PLA Default White Transmission Distance: 6
PLA BambuLab Basic Red Transmission Distance: 4
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with White
At layer #2 (0.24mm) swap to Black
At layer #7 (0.64mm) swap to BambuLab Green
At layer #8 (0.72mm) swap to Gray
At layer #10 (0.88mm) swap to White
At layer #23 (1.92mm) swap to Red for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.