PROGETTO BASATO SU STAMPE HUE FORGE
progetto pensato per dare una nuova idea nell'utilizzo delle stampe hue forge per dare un aspetto più intrigante della semplice stampa piatta, ma suddivisa su tre differenti livelli, per avere un effetto di prospettiva.
al lato della base è stato creato un piccolo spazio per poter passare un filo led per dare illuminazione per un effetto ancora più scenico.
nel progetto sono presenti
1- la struttura rigida da montare per assemblare insieme il tutto
2- file hue forge del cielo stellato ( consiglio di evitare l'uso della ventola aux per i primi layer cosi da evitare rialzamenti)
3- piramidi di Giza
4- la luna A.A.A.
https://makerworld.com/en/models/198225#profileId-218810
PER IL PROGETTO STAMPARE LA LUNA PIU' PICCOLA PRESENTE NEL PROGETTO MOSTRATO SOPRA
Qui di seguito le istruzioni per i cambio filamento
PROJECT BASED ON HUE FORGE PRINTS
project designed to give a new idea in the use of hue forge prints to give a more intriguing look than the simple flat print, but divided into three different levels, to have a perspective effect.
a small space has been created on the side of the base to pass a LED wire to provide lighting for an even more scenic effect.
are present in the project
1- the rigid structure to be assembled to assemble everything together
2- hue forge file of the starry sky (I recommend avoiding the use of the aux fan for the first layers so as to avoid rising)
3- Pyramids of Giza
4- the moon A.A.A. FOR THE PROJECT PRINT THE SMALLEST MOON PRESENT IN THE PROJECT SHOWN BELOW
https://makerworld.com/en/models/198225#profileId-218810
PIRAMYD
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Esun Brown Transmission Distance: 1.5
PLA Sunlu Meta White Transmission Distance: 8
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Brown
At layer #17 (1.44mm) swap to White for the rest.
SKY
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 1
PLA sunlu HS blue Transmission Distance: 3.2
PLA Sunlu Matte White Transmission Distance: 3
PLA MATTE esun azzurro Transmission Distance: 1.6
PLA Sunlu Matte White Transmission Distance: 3
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to blue
At layer #16 (1.36mm) swap to White
At layer #21 (1.76mm) swap to azzurro
At layer #25 (2.08mm) swap to White for the rest.
good print everyone. hoping you like it