Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu White Transmission Distance: 5
PLA+ Sunlu Silver Transmission Distance: 2
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu Grey Transmission Distance: 2

Swap Instructions:
Start with White
At layer #5 (0.48mm) swap to Silver
At layer #8 (0.72mm) swap to Orange
At layer #15 (1.28mm) swap to Grey for the rest.

Hier die passende Lightbox:

https://makerworld.com/en/models/191448