HSW Screw Insert
Copyright Claim
HSW Screw Insert
Boost
76
169
26
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
15 min
1 plate
110% size
12 min
1 plate
Boost
76
169
26
5
196
164
Released
Description
This is meant to slip into the parts that join the HSW panels together and works with just about any screw.
Comment & Rating (26)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
fits great, ya got to push them in but perfect for what im looking for, will print this file again
0
Reply
Boosted
They are supposed to fit into the inserts.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
to Small, they wiggle around
0
Reply
Boosted
I made a 110% scale print profile and they fit great!
0
Reply
fyi, your HSW plates are mounted back to front, the thicker part goes at the front, the thinner part goes against the wall. It is so the mounts can properly ‘click’ into the HSW holes.
6
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
Love them, scaled them up to 110%, and they fit great.I added my print profile too.
0
Reply
Boosted
I scaled it up to 110% and it works great. I added a print profile.
1
Reply
John, in your picture, your wall is backwards. the thinner side goes against the wall so the clips go in easier and can luck in place.
0
Reply
hsw
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
might need longer drywall screws
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
100% All working OK
0
Reply
i need something like this without the screw protruding setup. basically needb2 open ones.
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld