Spool labels prepared for ALL Bambu Lab filaments. (Status as of March 2024)
Use Textured PEI Plate and the following settings for best results:
Quality → Line with → First layer = 0.40mm
Quality → Advanced → Avoid crossing walls = checked
I have tried all the settings in combination with the Cool Plate. But I never got nice results, let alone reproducible ones.
You can modify and create new labels directly in bambulab slicer:
1-3: Click the text to edit it.
4. If you have edited all text you wish, click the move tool.
5-6: Move the texts where you want. Z-position should be 3.04, but every time the text is changed, this value will be reset.
7: Select the complete object.
8: Select the “Lay on Face” tool.
9: Click on the top surface, so it will printed upside down. (Unfortunately, the texts are not editable when the area is facing downwards)
10. Happy printing :D
Here are my tests, if you have any ideas on what else can be adjusted. Please let me know. :)