Search models, users, collections, and posts
Yet Another Fidget Infinity Cube v2
IP Report
Print Profile(9)
rounded, light (15% infill), 1 color
Designer
1.2 h
1 plate
rounded, heavy (100% infill), 1 color
Designer
2.3 h
1 plate
rounded, light (15% infill), 2 colors
Designer
5.2 h
1 plate
rounded, heavy (100% infill), 2 colors
Designer
6.2 h
1 plate
Click to see more
Open in Bambu Studio
Boost
583
1427
502
174
3.6 k
3.4 k
Released
Description
Boost Me (for free)
🚀 If you enjoyed this model, a Boost is the best way to support my work. Thank you!
An addictive fidget toy that you won't be able to set down! Prints in one piece and works right off the print bed.
Note: vertical hinges will be stiffest after printing, but break in after a bit of fidgeting!
Printing tips
- optimized for 0.2mm layer height and a 0.4mm nozzle
- 10% infill is plenty, but up to 100% infill increases the weight, which is super satisfying!
- part cooling on 100% fan speed (except first layer)
- vertical shells on 2+ perimeters for strength
- Cura users: disable No Skin in Z Gaps under your Shell settings
Variations
- yafic_v2.stl is the original – easy to print & loved by many
- yafic_v2_rounded.stl has rounded edges – more difficult to print, but nicer to hold
- yafic_v2_rounded_topjointmod.stl has modified top joints – prints better on some (fast) printers
- yafic_v2_test.stl is a smaller test file – use it to try out print settings
Browse my full fidget cube Collection → Fidget Cubes
Most of my models are SDFL (personal/non-commercial) // Yet Another Fidget Infinity Cube v2 is CC BY-SA 4.0 (sell with attribution)
──────────
──────────
Boost Me (for free)
🙏 If this print worked out for you, I’d really appreciate a Boost. Thanks!
License
This user content is licensed under a
Creative Commons Attribution-Share Alike
Comment & Rating (502)