Poop Chute Anti Clog The Nozzle Wiper by tengdesign

tengdesign

3D Printer>3D Printer Parts

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.16mm layer, 2 walls, 15% infill

Designer

38 min

1 plate

4.5(27)

Boost

153

303

386

191

Released

Description

Poop Chute Anti Clog The Nozzle Wiper

⚠️Use a PETG.
INSTALLATION:
Remove the screw holding the original wiper - Using the larger allen key.
Install the new wiper using the original screw.
Cut an A1 silicon wiper in half and install it on top of the new wiper.

Comment & Rating (40)

@daflexin

I had it printed from aluminum at Pcb way. Works Great!

@jmaxime89

How much did it cost you ?

@daflexin

Replying to @jmaxime89 :

US $48.46

@jmaxime89

Replying to @daflexin :

Not bad at all for a totally custom part

@BenjDavidson90

Unfortunately, it doesn't work well for me. When the printer inspects the first layer, the head sticks close to the wiper. And after 3/4 prints, the wiper was full of waste.

@TailSMeDiA

Print Profile

0.16mm layer, 2 walls, 15% infill

easy to print. comes out great without any changes.

@user_2185247215

非常完美，很喜欢。 very perfect，I like it.

@HCandeias

Print Profile

0.16mm layer, 2 walls, 15% infill

Boa impressão, sem qualquer problema.

@p666buc

Print Profile

0.16mm layer, 2 walls, 15% infill

printed great using Bambu Lab PETG

@PCHuDSoN

Print Profile

0.16mm layer, 2 walls, 15% infill

the pins on the wiper part were a bit off for me, so just cut them off. also grid infill isn’t the best and classic wall not ideal but it printed fine. may also be an idea to slight drop the wiper, ends up ver close.