Version 2 Dry box with whole and sectioned variants to allow printing on smaller printers(As small as approx 120x120 print bed using only small parts however windowed option is unavailable for a only small part build). The sectioned variant will also consume more filament(about 500g vs 400g)

If printing the sectioned variant, I recommend printing two small and two large lid and main body parts (as opposed to three large) as it makes it easier to put together as two halves with the pegs. you will also need to print 16x pegs (5mm diameterx30mm long) and 8x pegs (2.5mm diameter x 30mm long) to assemble as it adds rigidity to the walls. The sectioned variant also consumes more filament as it has thicker walls to allow for alignment notches on sections.

later there will be a variant that will allow the placement of a humidity sensor similar to what's shown in the pictures. for the window you will need a 70x60mmx2mm piece of plexiglass or similar. The Bowden tube hole is 10mm diameter and is designed to accept a PC4-10 4mm tube coupler.

UPDATE: added option for integrated humidity sensor. if you intend on using it you must ensure you select the correct lid orientation on specific sections and or whole file to ensure the battery door opens in the correct orientation(LF or RF) if the humidity sensor opens as depicted in one of the last pictures, you need the RF set of options. Parts that don't have an RF/LF designation are universal to either.

intended hygrometer is this or similar: https://www.aliexpress.us/item/3256805032264041.html