LED Corner Lamps are modern and stylish lamps that will add mood and color to any interior. These lamps utilize SK6812 LED Strip so that you can expect high quality lighting You can customize the brightness and light color using the remote control via WLED app on your phone, creating the perfect atmosphere for relaxation, entertainment, or work. The lamps feature a minimalist and elegant design that complements any style. Also for analog users there is a physical button for turning on and off these lamps.

Materials essential for building one: (These are not affiliate links)

1.Power supply 5V 60 watt: https://pl.aliexpress.com/item/33042313383.html?spm=a2g0o.order_list.order_list_main.47.25c61c245fB4ol&gatewayAdapt=glo2pol

2.Connectors: https://pl.aliexpress.com/item/1005005476259960.html?spm=a2g0o.order_list.order_list_main.37.25c61c245fB4ol&gatewayAdapt=glo2pol

https://pl.aliexpress.com/item/1005005043254447.html?spm=a2g0o.order_list.order_list_main.13.25c61c245fB4ol&gatewayAdapt=glo2pol

3.ESP32: https://pl.aliexpress.com/item/1005005564949759.html?spm=a2g0o.order_list.order_list_main.42.25c61c245fB4ol&gatewayAdapt=glo2pol

4.LED strip 1m 144 IP30: https://pl.aliexpress.com/item/4001297433411.html?spm=a2g0o.order_list.order_list_main.52.25c61c245fB4ol&gatewayAdapt=glo2pol

5.Aluminium Profile 1m: https://www.amazon.pl/SWAWIS-ksztalcie-aluminiowy-za%C5%9Blepk%C4%85-mocuj%C4%85cym/dp/B08SLWHYSH/ref=sr_1_18?__mk_pl_PL=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=2BQ5F5U7CB9CU&dib=eyJ2IjoiMSJ9.Zu8I11GVNT3ZDFGIhvnXj6Fi3z05llSOFUnyP0tEyPZfb_zhNXL2H3qctif4wh-ngLbfVJIXno7S9ZleV8xfDgd3qQIFVDIOSSIsH4PH1jCMA75AFOVc0yZitWIfrsc3XsO9-5_zHwnJ5TjaWYQuvAxhzhkL2yoPMzymoG0NK-XOnW72oYmqI52AbF2kDMCdyYAB8adYEyu0EXto4LtFJdmZNH0VtYNfiKj4nnopZAyjw5TSZIGFaqWXIXDqrpAe1xYj4mA53chnDex4px7Ij9MLFDN73c9kR9CfMPaefJY.VzFMZjflPzs-7CpZD4Kl4NUwqXVocxb_FmiVNHIZvVA&dib_tag=se&keywords=profil%2Baluminiowy%2Bled&qid=1709828046&sprefix=profil%2Baluminiowy%2Ble%2Caps%2C135&sr=8-18&th=1

6.Button: https://pl.aliexpress.com/item/1005003302861259.html?spm=a2g0o.productlist.main.31.146a62fdk6msYI&algo_pvid=ca30285c-725e-41c6-8836-daac49daae59&algo_exp_id=ca30285c-725e-41c6-8836-daac49daae59-15&pdp_npi=4%40dis%21PLN%2117.97%2117.97%21%21%2132.00%2132.00%21%402103853f17098284438568928e3f5c%2112000035351804940%21sea%21PL%211866857952%21&curPageLogUid=KmxXP1hPxooZ&utparam-url=scene%3Asearch%7Cquery_from%3A

7.Threaded Inserts M3,M4,M5: https://pl.aliexpress.com/item/1005003582355741.html?spm=a2g0o.productlist.main.1.38a27e375e5aPx&algo_pvid=9fd092f4-2954-4b0f-a77d-0d9e3f7a93a8&algo_exp_id=9fd092f4-2954-4b0f-a77d-0d9e3f7a93a8-0&pdp_npi=4%40dis%21PLN%216.48%218.83%21%21%211.60%212.18%21%40211b613117098291114318624ef3f3%2112000026370649786%21sea%21PL%211866857952%21&curPageLogUid=iNyfm9Rz7etD&utparam-url=scene%3Asearch%7Cquery_from%3A

How to build:

1. Print all parts.
2. Place threaded inserts in coresponding holes. (M3,M4,M5)
3. Mount the PSU to the roof inside the base.
4. Screw in the bridge for esp32 (Use hot glue for mounting the esp)
5. Insert AC connector and button in coresponding holes. (Use hot glue if needed)
6. Wire up AC connector to the PSU, esp32 to the PSU (VIN and GND pins), button to D14 pin and GND on PSU, LED strip to PSU and green data wire to D13 pin. VERY IMPORTANT!!! → Between Led strip (Data wire) and D13 pin solder a 400 ohm resistor to prevent data interfierences.
7. Screw in the aluminium profile bracket and insert the profile, clean it with alcohol before mounting led strip.
8. Clip in the milky cover, slide in the top cover and screw it in, clip in aluminium profile top cover.
9. Connect to the esp32 via USB C cable and go to https://install.wled.me/ to install WLED software.
10. In WLED click + to add your lamp, then click on it , press Config → LED Prefrences. Set max current to 8000 mA, in hardware setup tab click on Led outputs and pick sk8612 RGBW, set GPIO to 13, Length: 144 (Number of LED on the strip. If you have diffrent ammount then count it and set the corresponding ammount) Press Save.
11. OPTIONAL if you want to use the button then go to LED Prefreces then hardware setup and search for Button 1 GPIO: set this to: 14. Press Save. Go to Time & Macros, search for Button Actions and in the box button 1 short on→off set the value to 1, Press Save. Go to the home page (You will see a big circle with colours) then Presets , click add preset, name it: Button , uncheck all boxes , save to id: 1, Save., expand it and in the API command write: T=2 , then Save.

And there you have it! Your dream Led Lamp :)

If you have any questions i will be delighted to respond to them!

Big Thanks! to PLAUK from Printables for ESP32 case model.

https://www.printables.com/model/711587-esp32-wroom-32-usb-c-box-with-lid