QR-Code for Textured PEI
Remixed by
Copyright Claim
QR-Code for Textured PEI
Remixed by
Boost
29
53
21
Print Profile(3)
No supports 0.4mm nozzle, 0.12mm layer, 2 walls, 15% infill
Designer
20 min
1 plate
With supports 0.4 mm nozzle, 0.12mm layer, 2 walls, 15% infill
Designer
21 min
1 plate
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
Designer
41 min
1 plate
Boost
29
53
21
3
152
108
Released
Description
Changed the QR code for textured PEI plate.
Check out the new duble - sided version https://makerworld.com/en/models/245710#profileId-262115
Comment & Rating (21)
All
Boosted
Print Profile
No supports 0.4mm nozzle, 0.12mm layer, 2 walls, 15% infill
I was having serious problems with my aftermarket PEI plate. This fixed it and now prints are perfect!
The designer has replied
1
Reply
Glad to hear it helped! :)
0
Reply
Boosted
Replying to @Craft_3D
You nailed it! This is a boon for the community.
0
Reply
Print Profile
No supports 0.4mm nozzle, 0.12mm layer, 2 walls, 15% infill
1
Reply
Print Profile
No supports 0.4mm nozzle, 0.12mm layer, 2 walls, 15% infill
0
Reply
Print Profile
No supports 0.4mm nozzle, 0.12mm layer, 2 walls, 15% infill
it printed fine, but my X1 won’t read them. Printed 4 different times and it reads my other plates fine.
The designer has replied
0
Reply
Is the qr code blurry? If not you could try positioning the qr code close to the position where original qr code would be, maybe use the plate that came with the printer as a reference. Hope this helps.
0
Reply
Replying to @Craft_3D
Hi, Thank you for the suggestion. Unfortunately this did not work. I printed with a .4 nozzle and a .2 nozzle thinking it was the level of detail, but it did not fix the issue. I recently noticed NONE of my aftermarket plates with QR codes work. I have some Smooth PEI plates with QR codes that use to work but now they do not. This may be an issue with my specific printer/lidar camera. I will check and if so I will update review!
0
Reply
Boosted
This is fantastic! It fixed my issues with mu PEI plate!!
0
Reply
Print Profile
No supports 0.4mm nozzle, 0.12mm layer, 2 walls, 15% infill
Perfekt
0
Reply
Print Profile
No supports 0.4mm nozzle, 0.12mm layer, 2 walls, 15% infill
worked like a charm
0
Reply
Print Profile
No supports 0.4mm nozzle, 0.12mm layer, 2 walls, 15% infill
it worked.
0
Reply
Print Profile
With supports 0.4 mm nozzle, 0.12mm layer, 2 walls, 15% infill
1
Reply
Print Profile
No supports 0.4mm nozzle, 0.12mm layer, 2 walls, 15% infill
0
Reply
© 2024 MakerWorld