QR-Code for various printing plates (attachable)
Copyright Claim
QR-Code for various printing plates (attachable)
Boost
391
740
104
Print Profile(3)
PEI_COOL_HIGH TEMP_0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill
Designer
1.5 h
1 plate
0.12mm layer, 2 walls, 20% infill
35 min
1 plate
0.4 nozzle 0.2mm layer, 2 walls, 15% infill
23 min
1 plate
Boost
391
740
104
1
1.1 k
641
Released
Description
Jetzt erkennt der Drucker meine Druckplatten von Amazon ohne fehler dank des QR-Codes.
Comment & Rating (104)
All
trop super
2
Reply
Print Profile
PEI_COOL_HIGH TEMP_0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill
Didn't want to change the nozzle to 0.2mm so I tried in 0.4mm anyways and it does still work
Sometimes it doesn't scan properly because I didn't perfectly position it on the edge of the print plate
2
Reply
Print Profile
0.12mm layer, 2 walls, 20% infill
very good 👍
1
Reply
Print Profile
0.4 nozzle 0.2mm layer, 2 walls, 15% infill
they work but unless you know where they need to go it will cause delays in printing when the plate cannot recognize it because it's off by a hair. ended up just turning off the recognize build plate and never looked back
0
Reply
In case anyone else is hitting this issue, you can find a tool to guide you with proper placement at https://www.printables.com/model/432805-build-plate-qr-code-for-bambu-lab-x1c/files
P.S. Not my file, just happen to find it while looking around.
0
Reply
Gute Arbeit👍 für welche Platte genau von Ali wird denn die Cool oder high temp genommen? Ich dachte es sind alles PEI?
The designer has replied
0
Reply
je nach temperatur des Heizbetts abhängig
1
Reply
Print Profile
PEI_COOL_HIGH TEMP_0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill
Works perfectly with plate detection
0
Reply
Print Profile
0.12mm layer, 2 walls, 20% infill
works great! Tnx a lot.
0
Reply
work good. Tank you 😍
0
Reply
Print Profile
PEI_COOL_HIGH TEMP_0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill
Printed great! Only issue is to remove the supports without breaking the prints.
(Edited)
0
Reply
Print Profile
0.12mm layer, 2 walls, 20% infill
Passt und Funktioniert Super.
Vielen Dank dafür
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRemixes (2)
Related Models
© 2024 MakerWorld